IBM V7000 Introduction And Implementation Manual page 542

2. Log on to your Windows 2008 host and click Start  Administrative Tools  iSCSI
Initiator to open the iSCSI Configuration tab (Figure 12-15).
Figure 12-15 Windows iSCSI Configuration tab
3. Enter the IP address of one of the IBM Flex System V7000 Storage Node iSCSI ports and
click Quick Connect (Figure 12-16).
iSCSI IP addresses: The iSCSI IP addresses are different for the cluster and canister
IP addresses. The iSCSI addresses are configured directly on each of the canisters.
In case of a failover caused by a failing canister, the iSCSI IP-addresses fail over to the
surviving canister and therefore always remain online.
Figure 12-16 iSCSI Quick Connect
522
IBM Flex System V7000 Storage Node Introduction and Implementation Guide