IBM V7000 Introduction And Implementation Manual page 498

Flex system storage node

Hide thumbs Also See for V7000:

Table of Contents

Figure 11-14 shows the active Ethernet port for Canister 2 of IBM Flex System V7000

Storage Node. By comparing the canister PWWNs with Example 11-4 on page 477, you can

see that Canister 1 uses port INTA3 and Canister 2 uses INTA4.

Figure 11-14 Active 10 Gb Ethernet on Canister 2

Creating FCoE zoning with the GUI

Using CN4093 GUI by creating a zone which will include PWWNs of the host - Compute

Node 11 and the storage controller - IBM Flex System V7000 Storage Node the two end

points will be able to connect and storage can be accessed by the O/S platform residing on

Compute Node 11.The following zoning steps are included:

Create Alias

Create Zoneset

Activate Zoneset

IBM Flex System V7000 Storage Node Introduction and Implementation Guide

Show Quick Links

Table of Contents

Troubleshooting