Accessing I/O Modules Using Fsm - IBM V7000 Introduction And Implementation Manual

From the switch overview page, right-click one of the switches, and select Remote access 
Launch Web Browser. It will open the switch web GUI login prompt, from where the switch
can be configured. Figure 3-70 shows how to open the switch web GUI.
Figure 3-70 IBM FSM Explorer - Storage page - Switch GUI
Figure 3-71 shows the FC switch login page.
Figure 3-71 FC Switch login

3.3.5 Accessing I/O modules using FSM

In an IBM Flex system, node to node communication happens within the Chassis.
Network Control
Network Control is a plug-in that enables utilization of integrated network management
capabilities of an FSM. It has the following key features:
Logical network management allows management of port profiles, VLANs, ACLs, and
QoS in virtualized, live-migration environments.
It uses 802.1Qbg standards in integrated switches and PowerVM, KVM, and IBM "Osiris"
vSwitch for VMware.
Optional Fabric Management extends QoS Management by providing advanced
monitoring, VM priority, and rate limiting.
Network monitoring at a glance is provided by network topology perspectives with the
ability to see the components affected by network outages.
It enables end-to-end network and virtualization management.
Chapter 3. Systems management
135