Registering Stored Program for Build Job
Up to 100 actions can be registered with one stored program for Build Job. Up to 40
stored programs can be registered in the machine.
The following is the procedure for registering actions with stored programs.
1
Select [Store Build Job].
2
Select a number to register a
stored program.
Note
• Once a job is stored to a
• Select [
3
Set the feature you want to register.
Note
• The machine produces an audible tone while a stored program is registered.
You can change the volume of the sound that notifies of stored program registration. For information on
the settings, refer to "Stored Programming Tone" in "Audio Tones" of "Common Settings" under
"Chapter 10 System Settings" in the User Guide.
4
Press the <Start> button or <Clear All> button.
Note
• At the left of a stored program for Build Job on the list, the icon is displayed.
If no name is entered for a registered stored program, the name becomes "No Name".
For information on how to name a registered stored program, refer to "Enter/Change Name" (P.68).
button, it cannot be
overwritten.
] to return to the
previous screen or [
] to
move to the next screen.
Registering/Deleting/Renaming Stored Programs
7
69