10 System Settings
Differences in Login Setup/Auditron Administration
This section describes differences from Login Setup/Auditron Administration written in
the User Guide.
For differences in the setting values, refer to "System Settings Menu List" (P.87).
Remote Access
Verifies a remote accounting server. Can be used to manage user information
managed on a remote accounting server. User information cannot be registered on the
machine.
For information on the settings, refer to "Login Setup/Auditron Mode" under "Chapter 13
Authentication and Auditron Administration" in the User Guide.
Important • When switching to or from the remote access mode, the following information is lost.
Note
Guest User
Set whether to allow a user not registered with the remote authentication server to use
the machine as a guest user.
Guest Passcord
Configure the guest passcode as necessary. You can enter a 4 to 12-digit passcode.
10
128
- All user information
- Personal mailboxes and personal job flow sheets
• When a Kerberos server is used as a remote authentication server, if the time of the remote
authentication server and that of this machine differs, authentication may fail.
• Remote Access is not available when enabling [TCP/IP - IP Filter] of [Protocol Settings] in
[Network Settings] under [System Settings] on the touch screen.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.