Pki Settings (Public Key Infrastructure) - Fuji Xerox ApeosPort-II C4300 Function Manual

10 System Settings
Note
Important • Use the NetBIOS domain name for the domain name.
Server - IP Address
Enter the server IP address using values from 0 to 255.
Note
Server - Server Name
Enter the name of the server. Up to 64 characters are allowed.
Note
Important • Use the NetBIOS computer name or full computer name with DNS suffix for the server

PKI Settings (Public Key Infrastructure)

You can make the settings for SSL/TLS, S/MIME, and PDF/DocuWorks Signature.
Note
SSL/TLS Settings
Configure the settings of SSL/TLS.
Device Certificate - Server
Select a certificate to be linked.
SSL/TLS Communication
Select whether to enable or disable the SSL/TLS communication
SSL/TLS Port Number
Set the SSL/TLS communication port number in the range from 1 to 65535.
The standard port number is 443.
Device Certificate - Client
Select a certificate to be linked.
Remote Server Certificate Validation
Select whether to enable or disable a certificate of a remote server.
S/MIME Settings
10
Configure the settings of S/MIME.
Device Certificate - S/MIME
Select a certificate to be linked.
For information on the certificate, refer to the Network Administrator Guide.
S/MIME Communication
Select whether to enable or disable the S/MIME communication.
Receive Untrusted E-mail
If you select [Off], the machine does not receive the following e-mail:
118
• You can set this item when [SMB Server Setup] is [By Domain Name].
• You can set this item when [SMB Server Setup] is [By Domain Name and IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
• You can set this item when [SMB Server Setup] is [By Domain Name and Server Name].
name.
• Before setting the HTTP-SSL/TLS communication or S/MIME, the device certificate must be
set. For information on the certificate, refer to the Network Administrator Guide.