Table of Contents
Advertisement
Registering/Deleting/Renaming Stored Programs
The [Stored Programming] screen allows you to register and delete stored programs.
Important • When registering a stored program to select a paper size or paper quality of the Bypass tray,
• If one of the following operations is launched while a stored program is being registered, the
• If one of the following operations is launched after registering a stored program, the
Note
• Services using [System Settings], [Network Browser] of Scan to PC, Job Flow Sheet,
• The registering procedure for a stored program is cancelled when the <Interrupt> button is
1
Press the <All Services> button.
2
Select [Setup Menu].
3
Select [Stored Programming].
4
Select the feature.
Store
Registers a stored program.
Refer to "Registering a Stored Program"
(P.68).
Store Build Job
Registers a stored program for
Build Job.
Refer to "Registering Stored Program for Build Job" (P.69).
Delete
Deletes stored programs. Select the number to delete.
Yes
Deletes a stored program.
Note
• Deleted stored programs cannot be restored.
register both the size and quality. Only registering the paper size or paper quality may not
call for the stored program correctly.
stored program may not be registered correctly, or the registered stored program may not
run properly.
- Removing and inserting a paper tray.
- Loading or reloading paper into the Bypass tray.
- Removing and inserting a Doculyzer card.
registered stored program may not be called out correctly
- When the default Watermark settings are changed after registering a stored program in
which Watermark is registered.
- When features registered in a stored program become unavailable after the default settings
are changed in [System Settings].
- When the password of a mailbox that is a target of the operations registered in a stored
program is changed after registering the stored program.
Network Scanning, or Address Book cannot be registered.
pressed, another stored program is called, the Auto Clear feature causes a time-out, or a
popup window (paper jam, etc.) appears.
Registering/Deleting/Renaming Stored Programs
7
67
Advertisement
Table of Contents
