Pclstatus - Paxar Gold 6037EX Programmer's Manual

p c l S t a t u s
Description
Retrieves the Print subsystem's status.
After submitting a print job, the application should call pclStatus
in a loop, waiting until the printer becomes free. See "Pausing
While Printing" in Chapter 6 for more information.
Syntax
short far pclStatus(void);
Parameters
None
Return Values
0
1
703-793
Example
See "pclGetOnDemandSensor" for an example.
4-42 Programmer's Manual
The Print subsystem is ready.
The Print subsystem is busy.
A motion control error occurred. After the operator
corrects the printer condition, the application must call
pclClearError to reset the Motion Control subsystem.
Refer to the MPCL
information.
Packet Reference Manual
for more