Pclpapersetup - Paxar Gold 6037EX Programmer's Manual

p c l P a p e r S e t u p
Description
Gives information to the Print subsystem about the supplies
being used.
If you are using paper or synthetic supplies, precede this
function with a call to pclCalibratePaper.
If an application uses this function and
pclCalibratePaper, it should not use
Syntax
unsigned short far pclPaperSetup(unsigned short usStockLength,
Parameters
usStockLength
usStockWidth
usStockType
pclCalibrate.
The supply length in hundredths of an inch.
55-400
Values are
The supply width in hundredths of an inch.
120
Values are ,
The supply type. Values are
MMS_LOW_ENERGY
MMS_MEDIUM_ENERGY
MMS_HIGH_ENERGY
If you are using linerless supplies, experiment
with these values to see which one achieves the
best results.
unsigned short usStockWidth,
unsigned short usStockType);
.
150 200
, and .
Paper
Fax
Synthetic
Function Reference 4-39