Paxar Gold 6037EX Programmer's Manual page 123

Example
#include <stdio.h>
#include "scan1223.h"
#include "mmsultra.h"
void main(void)
{
short sStatus = 0;
LPI2OF5INFO I25config;
sStatus = scnOpenScanner();
if (sStatus == -2)
printf("Scanner error-- %d", sStatus);
else
{
sStatus = scnGetI2of5Info(I25config);
if (sStatus != 0)
printf("Scanner is disabled.");
else
{
I25config->uchEnable = SCN_ENABLE;
I25config->uchLength1 = 0;
I25config->uchLength2 = 0;
I25config->uchChkDgtAlgorithm = 1;
I25config->uchXmitCheckDigit = SCN_ENABLE;
I25config->uchCvtI2of5toEAN13 = SCN_DISABLE;
sStatus = scnSetI2of5Info(I25config);
if (sStatus != 0)
printf("Error setting values-- ", sStatus);
else
; /* Scan Bar Codes */
}
}
sStatus = scnCloseScanner();
}
// Command calls status
// I 2 of 5 data structure
// Enable scanner
// Get config.
// Set values
// Save values
// Disable scanner
Function Reference 4-87