s c n S e t D 2 o f 5 I n f o
Description
LMSSCEN.LIB only. Saves the scanner configuration values
the application set in the D2OF5INFO data structure. See
"D2OF5INFO" in Chapter 5 for a description of this data
structure.
To configure the scanner, the application:
1. Enables the scanner with scnOpenScanner or
scnOpenScannerShared.
2. Calls scnGetD2of5Info.
3. Sets the values in the D2OF5INFO data structure.
4. Calls scnSetD2of5Info.
Syntax
short far scnSetD2of5Info(LPD2OF5INFO lprD2of5Info);
Parameters
lprD2of5Info
Return Values
0
-5
-9
4-82
Programmer's Manual
When the application disables the scanner,
the configuration values go back to the
A pointer to a D2OF5INFO data structure.
Successful.
Invalid configuration value.
The scanner is disabled.
defaults.