Table of Contents
Advertisement
Message
Invalid Parameters for command
No Connection is present with
Ultra.
No directory was specified.
No File Specified.
No Files could be found.
No matching files found.
Open Failed.
Response could not be read
from Ultra
Request could not be sent to the
Ultra.
Soft Reboot Failed.
Sum check received from the
Ultra was invalid.
Solution
Verify the syntax of the command
and retry it with all of the
parameters.
Establish a PC/printer connection.
Verify the syntax of the command
and enter a directory name where
specified.
A file name parameter was left blank.
Retry the command, listing a file
name.
The file you specified in the
command does not exist. Verify the
correct name and/or spelling and
retry the command.
You specified file names with a wild
card, and there are none fitting the
specification. Verify the file names
and spelling and retry the command.
UServe is not running on the printer.
Start it and establish a PC/printer
connection.
Verify that a valid PC/printer
connection exists and retry the
command.
Verify that a valid PC/printer
connection exists and retry the
command.
Verify that a valid PC/printer
connection exists and retry the
command.
Verify that a valid PC/printer
connection exists and retry the
command.
Using UServe and UClient 7-25
Advertisement
Table of Contents
