Table of Contents
Advertisement
Example
uwd
displays the path to the current directory on the printer. For example,
D:\DATA
T r o u b l e s h o o t i n g
Consult the following table if any errors occur while you are using UClient
and UServe. The messages can appear individually or together. They
are listed alphabetically.
Message
Cannot find the requested file.
Command Failed.
Connection Closed to Ultra
Connection to the Ultra has not
been opened
Could not create directory:
Could not delete file:
Could not establish a
connection with the Ultra.
Solution
Verify that the specified file exists
and you spelled its name correctly.
Then, retry the command.
Verify that a valid PC/printer
connection exists. If so, then verify
the syntax and parameters of the
command and re-try it.
You tried to close a PC/printer
connection that already is closed.
Establish a PC/printer connection.
See "Establishing a PC/Printer
Connection."
There is not enough disk space to
create a directory. Free some space
before trying again.
You specified a non-existent file with
the command. Verify the spelling of
the name and try again.
Reboot the printer and re-establish
the PC/printer connection. If this
error still occurs, have the printer
serviced.
Using UServe and UClient 7-23
Advertisement
Table of Contents
