Settimeout - Paxar Gold 6037EX Programmer's Manual

s e t t i m e o u t
Description
Sets the length of time for the PC to wait for the printer to respond to a
command. The connection between the printer and PC does not have to
be active when entering this command.
Syntax
settimeout length
Parameters
length
The length of the timeout (in seconds).
Example

settimeout 10

sets the PC timeout to 10 seconds. If the command is successful, the
UClient prompt reappears.
u c d
Description
Changes the directory on the printer.
Syntax
ucd directory
Parameters
directory
The name or path of the new directory. Move up
one directory (the .. specification) does not work
with this command.
Example
ucd data
changes the printer to the data directory, displaying the UClient prompt
when complete.
Using UServe and UClient 7-17