Table of Contents
Advertisement
Example
#include <stdio.h>
#include "scan1223.h"
#include "mmsultra.h"
void main(void)
{
short sStatus = 0;
LPCODE128INFO config128;
sStatus = scnOpenScanner();
if (sStatus == -2)
printf("Scanner error-- %d", sStatus);
else
{
sStatus = scnGetCode128Info(config128);
if (sStatus != 0)
printf("Scanner is disabled.");
else
{
config128->uchEnableUSS128 = SCN_ENABLE;
config128->uchEnableUCCEAN128 = SCN_DISABLE;
config128->uchEnableISBT128 = SCN_DISABLE;
sStatus = scnSetCode128Info(config128);
if (sStatus != 0)
printf("Error setting values- ", sStatus);
else
; /* Scan Bar Codes */
}
}
sStatus = scnCloseScanner();
}
// Command calls status
// Code 128 data struct.
// Enable scanner
// Get config.
// Set values
// Save values
// Disable scanner
Function Reference 4-77
Advertisement
Table of Contents
