Table of Contents
Advertisement
Message
Could not get the file.
Could not put the file.
Could not remove directory:
Could not save file locally.
Did not receive a response from
the Ultra.
Error Running command on
Ultra. Returned Error = xxx
7-24 Programmer's Manual
Solution
Verify that a valid PC/printer
connection exists. If so, verify the
syntax of the command and retry it.
Verify that a valid PC/printer
connection exists. If so, verify the
syntax of the command. Then, retry
the command.
Verify that the directory you specified
exists and retry the command.
There is not enough space on the PC
to save a file received from the
printer. Free some space and retry
the command.
Verify that a valid PC/printer
connection exists. If so, increase the
length of the timeout. Then retry the
command.
From the user perspective, a
command may finish running, but
there can still be processing going
on behind the scenes before the
command is truly finished. A timeout
can occur during this timeframe.
Therefore, when a timeout error
occurs, check to see if the command
actually finished or not before trying
to correct the problem. For example,
if the error occurred on a put, verify
that the file copy completed.
A ROM-DOS error occurred on the
printer. Retry the command. If the
same error occurs, re-boot the
printer and/or have it serviced.
Advertisement
Table of Contents
