Table of Contents
Advertisement
S a m p l e 1
Function
Prints with the trigger.
Algorithm
1.
Initialize the Print subsystem without allocating font storage
memory.
2.
Loads a format packet.
3.
Performs the following until the operator presses the trigger (to
print), b (to break out of the loop), or f+0 to calibrate
supplies.
A. Checks whether the battery is charged enough for printing.
B. Loads a batch packet and prints the format.
C. Waits until the label prints by checking the status
repeatedly until it returns something other than "busy."
4. Closes the Print subsystem.
S a m p l e 2
Function
Prints using the on-demand sensor.
Algorithm
1. Initializes the Print subsystem without allocating font storage
memory.
2. Loads a format packet. This format defines the feed mode as
on-demand.
3. Checks whether the battery is charged enough for printing.
4. Loads a batch packet and prints the format.
A-2
Programmer's Manual
Advertisement
Table of Contents
