Table of Contents
Advertisement
To choose the boot options:
1 . Turn on the printer while pressing f until messages
appear. You must do this step. Otherwise, the date and
time prompts (the default) wait for input without appearing
on the screen.
2 . When "Starting ROM-DOS..." appears, the printer beeps.
You have approximately two seconds to do one of the
following:
Press f, then 5 to bypass both files. The boot
process continues with default configurations. The
printer also prompts you for the date and time.
Press f, then 8 to request a prompt at each line of
both files. Enter Y to process the line or N to bypass it.
Do nothing and let the printer process every line of both
files.
Booting from a PC
To boot the printer from the PC:
1 . Gather the following files on a floppy disk:
COMMAND.COM
REMDISK.EXE
LCD.COM
AUTOEXEC.BAT (at a minimum, this file must contain
one line containing
2 . Enter REMSERV A: at the PC's DOS prompt, where X is
the drive where the boot files reside.
3 . Turn on the printer and from the Startup Menu, choose #3.
The printer boots from the PC.
, which enables the display ).
LCD Y C
Printer Features 2-13
Advertisement
Table of Contents
