3. Press l or r to display the word length you need, then
press Enter/Pause. Press Escape/Clear until you see the
Main Menu.
S t o p B i t s
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps.
1. Press l or r until you see
2. Press Enter/Pause. The current setting is displayed, for
example:
3. Press l or r to display the number of stop bits you need,
then press Enter/Pause. Press Escape/Clear until you see
the Main Menu.
P a r i t y
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps.
1. Press l or r until you see
SERIAL COMM
l
Stopbits
STOPBITS
1
SERIAL COMM
l
Parity
r
r
r
Communication Values 5-3