Loading For Non-Peel Mode; Removing The Supply Roll In Peel Mode - Paxar TC6032EM Equipment Manual

Loading for Non-Peel Mode

To load supplies for non-peel mode:
1. Feed the supply under the applicator roller and over the label deflector.
Close the cover.
2.
Press ESC to exit.
3.
R e m o v i n g t h e S u p p l y R o l l i n P e e l M o d e
To remove supplies in peel mode:
Tear the backing paper just above the pinch roller.
1.
2. Open the supply cover completely.
3. Spread the supply holder tabs apart with one hand and remove the
supply roll.
Carefully pull out the supply backing paper still in place between the
4.
pinch and feed rollers.
3-6 Equipment Manual
Ap plicator Roller
Label Deflector