Mitsubishi FX3G Series Programming Manual page 834

FX /FX /FX /FX
3G 3U 3GC 3UC
Programming Manual - Basic & Applied Instruction Edition
Number and name
PLC Status
[D]8007
Operation frequency of M8007 is stored.
Momentary power
Cleared at power-off.
failure count
Default:
D8008
• FX
Power failure
10 ms (AC power supply type)
detection
• FX
5 ms (DC power supply type)
[D]8009 Lowest input device number of the I/O extension
24V DC failed device units in which 24 V DC power has failed
*1. The power failure detection time in FX
- 10ms for FX
- 100ms maximum for FX
from 10 to 100 ms.
- 5ms for FX
- 5ms for FX
not make any change in a sequence program.
- For FX
Clock
Accumulated instruction-execution time from step 0
[D]8010
(in 0.1-ms units)
Present scan time
Minimum value of scan time
[D]8011
(in 0.1-ms units)
Minimum scan time
Maximum value of scan time
[D]8012
(in 0.1-ms units)
Maximum scan time
0 to 59 seconds
D8013
(for real time clock)
Second data
0 to 59 minutes
D8014
(for real time clock)
Minute data
0 to 23 hours
D8015
(for real time clock)
Hour data
1 to 31 days
D8016
(for real time clock)
Day data
1 to 12 months
D8017
(for real time clock)
Month data
2 digits of year data (0 to 99)
D8018
(for real time clock)
Year data
0 (Sunday) to 6 (Saturday)
D8019
(for real time clock)
Day-of-the-week data
*2. A memory board having the real time clock function is required in FX
832
Series
Content of register
*1
, FX PLCs:
3U 2N
, FX PLCs:
2NC 3UC
PLC used with a 100V AC power supply system. D8008 is set to 10ms by default.
2N
PLC used with a 200V AC power supply system. D8008 can be set ranging
2N
PLC used with a DC power supply type. Write "K-1" to D8008 for correction.
2N
PLC used with a DC power supply type. System writes "K-1" to D8008 for correction. Do
2NC
and FX PLCs, refer to Subsection 37.2.4.
3U 3UC
→Refer to Subsection 37.2.5.
→Refer to Subsection 37.2.5.
→Refer to Subsection 37.2.5.
→Refer to Subsection 37.2.7.
→Refer to Subsection 37.2.7.
→Refer to Subsection 37.2.7.
→Refer to Subsection 37.2.7.
→Refer to Subsection 37.2.7.
→Refer to Subsection 37.2.7.
→Refer to Subsection 37.2.7.
37 Operation of Special Devices (M8000 -, D8000 -)
FX FX FX
3G 3GC 3U
– –
– –
–
and FX PLCs is as follows.
2N 2NC
Same Same Same
as on as on as on
the the the
right right right
37.1 Special Device List (M8000 -, D8000 -)
Applicable model
Correspond-
FX ing special FX FX
3UC 1S 1N
device
M8007 – –
M8008 – –
– M8009 – –
–
Same
Indicated value includes wait-
as on –
ing time of constant scan opera-
the
tion (when M8039 is activated).
right
–
–
–
–
–
–
–
–
PLC.
2NC
FX FX FX
2N 1NC 2NC
–
–
–
*2
*2
*2
*2
*2
*2
*2