Mitsubishi FX3G Series Programming Manual page 326

Programmable controllers

Hide thumbs Also See for FX3G Series:

Table of Contents

Programming Manual - Basic & Applied Instruction Edition

• When a device number is exceeded, "n" is handled as a smaller value in the possible range.

• Note that the 32-bit value [n+1, n] is valid when D or R is specified as "n" in a 32-bit instruction.

In the case of "DMEAN D0 D100 R0", "n" is [R1, R0].

When "n" is any value outside the range from "1" to "64", an operation error (M8067) is caused.

Program example

The data of D0, D1 and D2 are summed, divided by "3", and then stored to D10.

12 Data Operation – FNC 40 to FNC 49

(D 0) + (D 1) + (D 2)

12.6 FNC 45 – MEAN / Mean

Fx3u series Fx3gc series Fx3uc series