Mitsubishi FX3G Series Programming Manual page 374

FX /FX /FX /FX
3G 3U 3GC 3UC
Programming Manual - Basic & Applied Instruction Edition
6. Others
1) Types of pulse output, positioning and other relevant instructions and their target output numbers
Classification
Pulse output
Positioning
High-speed
processing
*1. Y002 (pulse output destination) cannot be specified for the FX
PLC.
*2. The pulse output destination Y003 can be specified only when two special high-speed output adapters are
connected to an FX
*3. This function is supported only in FX
2) When using the same output relay (Y000 or Y001) in several instructions.
While a pulse output monitor (BUSY/READY) flag is ON a pulse output instruction and positioning instruction for
the same output relay cannot be executed.
While a pulse output monitor flag is ON even after the instruction drive contact is set to OFF, a pulse output
instruction or positioning instruction for the same output relay cannot be executed.
Before executing such an instruction, wait until the pulse output monitor flag turns OFF and one or more operation
cycles pass.
Pulse output destination device
3) "Frequency control mode" in which DHSZ (FNC 55) and PLSY (FNC 57) instructions are combined can only be
used once in a program.
Program example (when outputting pulses without any limitation)
When S is set to K0, pulses are output without any limitation.
2
Command
input
FNC 57
DPLSY
372
Series
Instruction
PLSY(FNC 57)
PLSR(FNC 59)
DSZR(FNC150)
*3
DVIT(FNC151)
ZRN(FNC156)
PLSV(FNC157)
DRVI(FNC158)
DRVA(FNC159)
PWM(FNC 58)
PLC.
3U
/FX
3U
Pulse output monitor flag
Y000
Y001
K1000 K0 Y000
13 High-Speed Processing – FNC 50 to FNC 59
Instruction name
Pulse Y output
Acceleration/deceleration setup
DOG search zero return
Interrupt positioning
Zero return
Variable speed pulse output
Drive to increment
Drive to absolute
Pulse width modulation
PLC (14-point and 24-point type) and FX
3G
PLCs.
3UC
M8340
M8350
Y000
13.8 FNC 57 – PLSY / Pulse Y Output
Target output numbers
Y000,Y001
Y000,Y001
*1
Y000,Y001,Y002 ,Y003
Y000,Y001,Y002,Y003
*1
Y000,Y001,Y002 ,Y003
*1
Y000,Y001,Y002 ,Y003
*1
Y000,Y001,Y002 ,Y003
*1
Y000,Y001,Y002 ,Y003
*1
Y000,Y001,Y002 ,Y003
No limitation (K0)
1000Hz
*2
*2
*2
*2
*2
*2
*2
3GC