System Download - Interlogix XTI-5 Installation Manual

System download

The system download is used to connect the system with the Enterprise
Downloader software and complete any tasks programmed into Enterprise
Downloader.
To initiate a system download:
1. Access the System Tests screen through the Status & Settings screen by
pressing ENTER next to System Tests.
2. Enter the access code and press OK.
3. Press System Download.
The system will signal when the download is complete.
Offsite phone operation
Test the system from a remote phone by calling the panel and using the
commands in Table 27 below.
When the panel answers the phone call:
1. Press * on the phone.
2. Enter master access or user code.
Table 27: Phone commands
System function
Disarm
Arm doors/windows
Arm motion sensors
Arm doors/windows with no entry delay 2 2
Arm doors/windows and motion
sensors
Listen in to house
Specific light on
Specific light off
Contents Simon XTi-5 Installation Manual
Phone command
1
2
3
2 3
5 to listen in to the house
Once in listen in to house the following options are
available:
•
0 or 1 to speak
•
3 or 6 to listen
•
7 to extend call
Note: When in this mode, the user cannot re-enter the
previous menu. You must hang up and call back in to
the panel to perform additional functions.
*, <unit number>
#, <unit number>
63