Main Parameters; Meter Setting And Adjustment - Toshiba VF-S15 Instruction Manual

5. Main parameters

Here are described main parameters you set before use according to the section 11. Tables of parameters and data.
5.1

Meter setting and adjustment

 : Meter selection
 Function
Output of 0 - 1mAdc, 0 (4) - 20mAdc, 0 - 10vdc can be selected for the output signal from the FM
terminal, depending on the  setting. Adjust the scale at .
Use an ammeter with a full-scale 0 - 1mAdc meter.
The  (analog output bias) needs to be adjusted if output is 4 - 20mAdc.
[Parameter setting]
Title


 Resolution: All FM terminals have a maximum of 1/1000.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Function Adjustment range
0: Output frequency
1: Output current
2: Frequency command value
3: Input voltage (DC detection)
4: Output voltage (command value)
5: Input power
6: Output power
7: Torque
8: -
9: Motor cumulative load factor
10: Inverter cumulative load factor
11: PBR (Braking resistor) cumulative
load factor
12: Stator frequency
Meter 13: VIA input value
14: VIB input value
selection
15: Fixed output 1
(output current 100% equivalent)
16: Fixed output 2
(output current 50% equivalent)
17: Fixed output 3
(Other than the output current)
18: RS485 communication data
19: For adjustments ( set value is
displayed.)
20: VIC input value
21, 22: -
23: PID feedback value
24: Integral input power
25: Integral output power
Meter
adjustment
gain
 : Meter adjustment gain
Supposition output at
Maximum frequency ()
Maximum frequency (fh)
1.5x rated voltage
1.5x rated voltage
1.85x rated power
1.85x rated power
2.5x rated torque
Rated load factor
Rated load factor
Rated load factor
Maximum frequency (fh)
Maximum input value
Maximum input value
Maximum value (100.0%)
Maximum input value
Maximum frequency (fh)
-
E-1
E6581611
Default setting
fsl=17
-
-
-
-
-
-
-
1000x f749
1000x f749
-
5
0
-