Main Parameters; Searching For Changes Using The History Function - Toshiba VFNC3-2001P Instruction Manual

efesotomasyon.com -Toshiba inverter,drive,servo,plc

5. Main parameters

Before you operate the inverter, the parameters that you must first program are the basic parameters.
5.1

Searching for changes using the history function

()
 : History function
History function ():
Automatically searches for 5 latest parameters that are programmed with values different from the
standard default setting and displays them in the . Parameter setting can also be changed
within this group .
Notes on operation
• If no history information is stored, this parameter is skipped and the next parameter "" is
displayed.
•  and  are added respectively to the first and last parameters in a history of changes.
How to use the history function
Operation panel
action
MODE
LED display
Displays the operation frequency (operation stopped).
(When standard monitor display selection = [Operation

frequency])
The first basic parameter "" (history function) is displayed.

The parameter that was set or changed last is displayed.

 Press the center of the setting dial to display the set value.
Turn the setting dial to change the set value.

Press the center of the setting dial to save the changed value. The
parameter name and the programmed value will flash on and off
⇔
alternately.
Turn the dial as described above to search for and display changed
****
parameters to check and change the settings.
: First historic record

: Last historic record
()
E-1
E6581595
Operation
5