Toshiba VF-S15 Instruction Manual page 75

4.2.1
The inverter enters this mode by pressing the MODE key when the Easy setting mode is selected
When you are unsure of something
during operation:
You can return to the Standard monitor
mode by pressing the MODE key
several times.
Standard monitor mode
 Setting parameters in the Easy setting mode
(1) Select parameter to be changed. (Turn the setting dial.)
(2) Read the programmed parameter setting. (Press the center of the setting dial.)
(3) Change the parameter value. (Turn the setting dial.)
(4) Press this key to save the parameter value. (Press the center of the setting dial.)
● To switch to the Standard setting mode, press the EASY key in the Standard monitor mode. "std" is displayed,
and the mode is switched.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Settings in the Easy setting mode

MODE

(1)



Easy setting mode (Registered parameters at default setting)
Title
cmod
fmod Frequency setting mode selection 1
acc
dec
ul
ll
thr Motor electronic-thermal protection level 1
fm
f701
psel
(2)

MODE
(3)

D-5
E6581611
Function
Command mode selection
Acceleration time 1
Deceleration time 1
Upper limit frequency
Lower limit frequency
Meter adjustment gain
Current/voltage unit selection
EASY key mode selection
(4)
*
⇔
* Parameter title and the setting
value are displayed alternately
4