Toshiba VF-S15 Instruction Manual page 336

 Table of output terminal functions 4
Function
Code
No.
144 PIDF
145 PIDFN
146 FLR
147 FLRN
150 PTCA
151 PTCAN
152, 153
154 DISK
155 DISKN
156 LI1
157 LI1N
158 LI2
159 LI2N
160 LTAF
161 LTAFN
162 NSA
163 NSAN
166 DACC
167 DACCN
168 DDEC
169 DDECN
170 DRUN
171 DRUNN
172 DDC
173 DDCN
174 to 179
180 IPU
182 SMPA
183 SMPAN
222 to 253
254 AOFF
255 AON
*1: Factory specific coefficient parameters are manufacturer setting parameters. Do not change the value of these parameters.
Note 1: As function No. that are not described in the table above are assigned "No function", output signal is always "OFF" at
even number, output signal is always "ON" at odd number.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Function
Signal in accordance of frequency command
Inversion of signal in accordance of
frequency command
Fault signal (output also at a retry waiting)
Inversion of fault signal (output also at a
retry waiting)
PTC input alarm signal
Inversion of PTC input alarm signal
Factory specific coefficient
Analog input break detection alarm
Inversion of analog input break detection
alarm
F terminal status
Inversion of F terminal status
R terminal status
Inversion of R terminal status
Cooling fan replacement alarm
Inversion of cooling fan replacement alarm
Number of starting alarm
Inversion of number of starting alarm
Acceleration operation in progress
Inversion of acceleration operation in
progress
Deceleration operation in progress
Inversion of deceleration operation in
progress
Constant speed operation in progress
Inversion of constant speed operation in
progress
DC braking in progress
Inversion of DC braking in progress
Factory specific coefficient
Integral input power pulse output signal
Shock monitoring pre-alarm signal
s
Inversion of hock monitoring pre-alarm
signal
Factory specific coefficient
Always OFF
Always ON
Action
ON: Frequency commanded by  and  are
within ±.
OFF: Other than those above
Inversion of PIDF
ON: While inverter is tripped or retried
OFF: While inverter is not tripped and not retried
Inversion of FLR
ON: PTC thermal input value is f646 or more
OFF: PTC thermal input value is less than f646
Inversion of PTCA
-
ON: VIB terminal input value is f633 or less
OFF: VIB terminal input value is more than f633
Inversion of DISK
ON: F terminal is ON status
OFF: F terminal is OFF status
Inversion of LI1
ON: R terminal is ON status
OFF: R terminal is OFF status
Inversion of LI2
ON: Cooling fan reaches parts replacement time
OFF: Cooling fan does not reach parts replacement time
Inversion of LTAF
ON: Number of starting alarm is f648 or more
OFF: Number of starting alarm is less than f648
Inversion of NSA
ON: Acceleration operation in progress
OFF: Other than those above
Inversion of DACC
ON: Deceleration operation in progress
OFF: Other than those above
Inversion of DDEC
ON: Constant speed operation in progress
OFF: Other than those above
Inversion of DRUN
ON: DC braking in progress
OFF: Other than those above
Inversion of DDC
-
ON: Integral input power unit reach
OFF: Other than those above
ON: Current / torque value reach the shock monitoring
detection condition
OFF: Other than those above
Inversion of SMPA
-
Always OFF
Always ON
K-37
E6581611
Reference
6.24
6.19.3

6.29.16
*1
6.29.14
7.2.2
6.29.15
6.29.17

7.2.2
6.12.1
11
*1
6.33.1
6.28
*1
7.2.2