Saving Configuration Files - GE Optica Operator's Manual

4.7 Saving Configuration Files

This option allows the user to save a configuration file and then load it onto the system for future use.
Note: To activate the selected configuration, the system must be reset.
To save the current configuration file:
1. Select
Configuration
2. Type a file name under
.
File
3. To load or delete an existing configuration file, highlight the name under
or
LOAD DELETE
4. To exit the Configuration screen, click
Optica™ Operator's Manual
on the Main Screen. A screen similar to the one shown in Figure 36 below appears.
Save Configuration File
as desired.
OK
Figure 36: Configuration Screen
and click . The name will appear under
SAVE
.
Chapter 4. Programming the VGA Optica
Load Configuration
Load Configuration File
and click
57