Chapter 4. Programming the VGA Optica
4.5 Menu 1
is shown in Figure 30 below. This menu is accessed by selecting the
Menu 1
and pressing
ENTER
.
allows programming of the items in the following sub-sections.
Menu 1
4.5.1 Analog Outputs
For more information on using the analog outputs, see "Analog Outputs" on page 15.
Item
Output
Choose which output channel is being programmed
Parameter
Choose which parameter will be output on the selected
channel
Units
Choose the units for this parameter
Upper Limit
Set the parameter value that will produce full-scale output
Lower Limit
Set the parameter value that will produce zero output
44
Figure 30: Menu 1
Table 7: Analog Output Options
Function
control button on the main screen
Menu
Available Options
A and/or B
Humidity, Temperature, Pressure
or User Equation
(See Table 5 on page 42 for the
parameter chosen.)
(Enter a number)
(Enter a number)
Optica™ Operator's Manual