Set Time & Date; Restore Defaults - GE Optica Operator's Manual

Chapter 4. Programming the VGA Optica
4.6.6 Set Time & Date
The Time and Date menu is accessed by selecting on , and pressing .
Set Time and Date Menu 2 ENTER
To set the Optica's internal clock, press to select each field of the date and time, and press the up and down
TAB
softkeys to set each field. When the settings are correct, tab to the button and press .
OK ENTER
Figure 35: Time and Date

4.6.7 Restore Defaults

To access this choice, select the button on , and press .
Restore Defaults Menu 2 ENTER
This screen resets all programmable items to the factory defaults shown in Table 4 on page 35. Press to select ,
TAB Yes
and press the key.
ENTER
56 Optica™ Operator's Manual