Datalog - GE Optica Operator's Manual

4.5.8 Datalog

Enter parameters for automatically logging data within the Optica. This menu is accessed by selecting the
control button on
Menu 1
The large window below the center of the screen shows a list of parameters chosen for logging.
Item
Status* Enable or disable datalog.
Interval* Enter the logging interval in seconds.
Decimals Enter the number of decimal places for logged data. Enter a number (6 maximum).
Separator* Choose separator to be used between parameters.
Terminator* Choose the terminator(s) for each group of data.
Parameters Set the parameter to be programmed (below).
Units Set the units for the selected parameter.
REMOVE Control button to remove selected item from the list. Select button and press
ADD Control button to add the selected unit to the list.
RESET Delete datalog files.
DOWNLOAD Control button to display the logged data on the
Download screen (see below).
*
Indicated items apply to the entire datalog file.
Optica™ Operator's Manual
and pressing ENTER.
Figure 32: Datalog Menu
Table 14: Datalog Options
Function
Chapter 4. Programming the VGA Optica
Available Options
Enabled/Disabled
Enter a number.
Space, Comma, Tab
CR, CR-LF, LF
Humidity, Temperature,
Pressure, or User Equation
See Table 5 on page 42.
Select button and press
Select button and press
Select button and press ENTER.
Data Log
.
ENTER
.
ENTER
.
ENTER
51