Appendix G. Communicating With The Optica Using Ethernet; Direct Communication - GE Optica Operator's Manual

Appendix G. Communicating with the OPTICA Using Ethernet

G.1 Direct Communication
The networking configuration for an
configuration for a 4x40 Optica
following commands:
Note: <> means carriage return.
$SetIPAddress <IPADDRESS><>
$SetSubnetMask <SubNetMask>
$SetDefaultGateway <Gateway>
$SetHostName <HostName><>
$SetIPSource <STATIC><>
$SetIPSource <DHCP><>
$GetNetworkSettings<>
$SaveNetworkSettings<>
$DeleteNetworkSettings<>
(Deletes registry entries - removes .FDF & .CRC File)\r\n
$SaveAllSettings<>
Optica™ Operator's Manual
OPTICA VGA
model with Ethernet capability can be configured using the RS-232 port and the
Example: $SetIpAddress 127 0 0 0 0 <>
(i.e 255 255 255 0)\r\n
Example: $SetSubnetMask
Displays the network settings\r\n
(Write Network settings to the registry)\r\n
(Write all settings to non-volatile memory)\r\n
Appendix G. Communicating with the OPTICA Using Ethernet
model can be done using the front panel. The networking
(i.e 127 0 0 0)\r\n
255 255 255 0 <>
(i.e 0 0 0 0)\r\n
(i.e Optica)\r\n
(STATIC IP)\r\n
(DHCP IP)\r\n
105