Using The Rack Mounting Option - GE Optica Operator's Manual

Chapter 2. Installation

2.2.2 Using the Rack Mounting Option

There is an optional kit for mounting the benchtop unit in a standard 19-inch rack (see Figure 6 below, Figure 7 on
page 9, and Figure 8 on page 10). The two brackets are attached to the front panel using four #8 screws. The Optica is
mounted to the brackets using the eight mounting holes located just in front of and behind the unit's feet.
Figure 6: Optica Rack-Mount Adapter
8 Optica™ Operator's Manual