If The Oven Is To Switch On And Off Automatically; Rapid Heating; Setting The Clock - Bosch HGV745363Q Instruction Manual

If the oven is to switch on and off automatically

Please remember that easily spoiled foods must not be allowed to
remain in the cooking compartment for too long.
Example in the picture: Setting for
190 °C. It is 10:45 . The meal takes 45 minutes to cook and
should be ready at 12:45 .
1. The function selector is used to set the type of heating.
2. The temperature selector is used to set the temperature or grill
setting.
0
3. Press the Clock button.
4. Use the @ or A button to set the cooking time.
5. Press the 0 Clock button repeatedly until the
flashes.
You can see in the display when the meal will be ready.
PLQ

Setting the clock

When the appliance is connected for the first time or after a power
0
cut, the symbol and three zeros flash in the display. Set the
clock. The function selector must be switched off.
Setting procedure
1. Press the 0 Clock button.
12.00 appears in the display and the
2. Use the + or - button to change the clock.
After a few seconds, the time is saved. The
Changing from summer to winter time, for example
Press the 0 Clock button twice and change the time using the +
or - button.
74
% Top/bottom heating at
y End symbol
K PLQ
VHF
0
symbol flashes.
0
symbol goes out.
@
6. Use the button to set a later end time.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.
PLQ
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
and switch off the function selector.
Note: You can make changes as long as the symbol is flashing.
When the symbol lights up, the setting has been adopted.

Rapid heating

With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
1. Set the function selector to
2. Turn the temperature selector to set the desired temperature.
The p symbol lights up in the display. The oven begins to heat up.
The rapid heating process is complete.
p
The symbol goes out in the display. Place your dish in the oven
and select the desired type of heating.
K
PLQ
VHF
0 button twice
I .