Cpu Indicators; C200H-Cpu11-E - Omron SYSMAC C200H Installation Manual

CPU

C200H-CPU11-E

Memory
Pack
connector
Bus connector
Available only with the
C200H-CPU11-E.
Used to connect this
Unit to a SYSMAC
LINK Unit or SYSMAC
NET Link Unit.
Programming Con-
sole connector cov-
er storage slot
Programming Console connector
(Peripheral device connector)

CPU Indicators

12
Downloaded from Elcodis.com electronic components distributor
Indicators
The following figure shows the indicators that are located on the front panel of
the three CPU models.
RUN indicator (green)
Lights when the PC is
operating normally.
ALARM (blinking red)
Blinks if an error occurs that
does not stop the CPU.
ERROR (solid red)
Lights if an error occurs that stops the
CPU, at which time the RUN indicator
turns OFF and the outputs are turned
OFF.
POWER (green)
Lights when power is
supplied to the CPU.
OUT INHIBIT (red)
Lights when the Load OFF
flag (SR bit 25215) turns ON,
at which time all the outputs
are turned OFF.
Section 2-2
Power fuse
MF51NR (5.2 dia. x 20
mm) 2A 250 V
Battery compart-
ment
Handheld Program-
ming Console con-
nector