D Repeater Access Tone Frequency Setting - Icom IC-7100 Instruction Manual

Previous view
4
RECEIVE AND TRANSMIT
Repeater operation (Continued)
D
Repeater access tone frequency setting
Some repeaters require a subaudible tone to be ac-
cessed. Subaudible tones are superimposed on your
normal signal and must be set fi rst. You can select 50
tones from 67.0 Hz to 254.1 Hz.
q
In the FM mode, push
MENU
to select the "M-2" screen (M-2 menu).
w D) one or more times to turn ON the
Touch [TONE](
Tone encoder function.
• "TONE" appears.
• Touch [TONE](D) to toggle between "TONE," "TSQL,"
"DTCS" and OFF (icon disappears).
e D) for 1 second to display the "TONE"
Touch [TONE](
screen.
• "Repeater Tone" appears.
r
Rotate the Dial to select the desired tone squelch
frequency. See the table below.
• If desired, touch [DEF] for 1 second to reset to the default
setting.
t
Push (C) to exit the "TONE" screen.
MENU
y
Communicate in the normal way.
• Subaudible tones are superimposed on your transmit sig-
nal.
• Selectable tone frequencies
67.0 88.5 114.8 151.4
69.3 91.5 118.8 156.7
71.9 94.8 123.0 159.8
74.4 97.4 127.3 162.2
77.0 100.0 131.8 165.5
79.7 103.5 136.5 167.9
82.5 107.2 141.3 171.3
85.4 110.9 146.2 173.8
(C) one or more times
(Unit: Hz)
177.3 203.5 250.3
179.9 206.5 254.1
183.5 210.7
186.2 218.1
189.9 225.7
192.8 229.1
196.6 233.6
199.5 241.8
4-26
L eft D isplay R ight
C enter
Repeater tone icon
Touch for 1 second
to reset to default
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Touch [TONE]
for 1 second
Tone frequency