Installing The Ac Power Cord Retainer - Cisco ASR 901 10G Series Hardware Installation Manual

Chapter 3 Installing the Cisco ASR 901 10G Router

Installing the AC Power Cord Retainer

Complete the following steps to install the AC power cord retainer to the Cisco ASR 901 10G router
using the corresponding mounting point.
Choose the sleeve size of the power cord retainer based on the thickness of the cord. The smaller sleeve
Step 1
can be snapped off and used for thin cords. See
Slide the retainer around the AC power cord, and pass it around the lanced loop on the router. See
Step 2
Figure
Figure 3-13
1
3
Slide the retainer through the first latch. See
Step 3
Figure 3-14
OL-28105-02
3-13.
Inserting the Retainer through the Lanced Loop
AC power cord
Sleeve for thinner power cords
Sliding the Retainer Through the Latch
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
Figure 3-16.
4 3
2
Power cord retainer
4 Loop
Figure 3-14.
3 2
Mounting the Cisco ASR 901 10G Router
2 1
1
3-15