Installing the Router
This chapter contains the following sections:
•
•
•
•
•
•
•
Overview
This section describes the equipment required, and the procedures to be performed for successfully installing
the Cisco IR1800 Series router.
Safety Information
Caution
Do not install the router or power supplies next to a heat source of any kind, including heating vents.
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040
Overview, on page 23
Safety Information, on page 23
Equipment, Tools, and Connections, on page 24
Installing the Router, on page 25
Mounting on a Wall, Table, or Other Flat Surface, on page 25
Installing a DIN Rail, on page 27
Installing the Router Ground Connection, on page 35
C H A P T E R
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
3
23