Memory Scan; D Memory (Skip) Scan - Icom ID-51A Advanced Manual

Previous view
13
SCAN OPERATION

■ Memory scan

Repeatedly scans all programmed Memory channels.
There two types of scan in the memory mode; Memory
scan and memory bank scan.
• Channels set as "PSKIP" or "SKIP" are skipped during
a scan.
• Two or more memory channels, which are not set
as skip channels, must be programmed into start a
memory scan.

D Memory (skip) scan

The memory channels set as "PSKIP" or "SKIP" skip
channels are not scanned.
q Push [M/CALL] one or more times to select the
Memory mode.
w Hold down [SCAN]
e Push D-pad( ) to select the scan type.

• ALL : Full scan
• BAND : Band memory scan
• MODE : Mode memory scan
• DUP : Duplex scan (p. 13-2)
( Appears only when duplex is set on the chan-
nel.)
• TONE : Tone scan (For tone scanning)
D-pad
(Ent)
( )
r Push D-pad(Ent) to start the scan.
• If desired, rotate [DIAL] to switch the scanning direction
during a scan.
• The scan resumes even while the MENU screen is dis-
played.
t To cancel the scan, hold down [SCAN]
ond.
• Pushing [CLR] also cancels the scan.
TIP: Holding down [SCAN]
[DIAL] also selects the scan type. The scan immedi-
ately starts when [SCAN]
for 1 second.
for 1 sec-
[DIAL]
and then rotating
is released.
When a signal is received.
The S-meter shows the
received signal strength.
13-9
Push [M/CALL]
Hold down [SCAN]
for 1 second.
Push D-pad() to
select, then push
D-pad(Ent).
Blinks
Blinks
Blinks
Memory channel
number
Blinks
.