About The Repeater List Default Values; D Opening The Default Repeater List - Icom ID-51A Advanced Manual
Vhf/uhf transceiver
Hide thumbs
Also See for ID-51A:
- Advanced instructions (369 pages) ,
- Basic instructions (104 pages) ,
- Brochure & specs (5 pages)
Table of Contents
Advertisement
Previous view
9
D-STAR OPERATION <ADVANCED>
■ About the Repeater List default values
You can check the Repeater List default values using
the supplied CS-51PLUS2
The ICF (Icom Cloning Format) file, including the de-
fault Repeater List, can also be downloaded from the
Icom website.
http://www.icom.co.jp/world/support/download/firm/
index.html
If you open the downloaded ICF file with the CS-
51PLUS2, the Repeater List default values are dis-
played on the screen.
To reset the Repeater List to the default, write the ICF
file to the transceiver using the CS-51PLUS2*
the ICF file to the microSD card*
transceiver.
1
*
See the CS-51PLUS2 instruction manual when us-
ing the CS-51PLUS2.
*
2
See page 2-10 when using the microSD card.
D Opening the default Repeater List
q Start the CS-51PLUS2.
• See the CS-51PLUS2 instruction manual for how to in-
stall the software.
w Click [Open] to open the ICF file.
e Click the [Repeater List] folder to show the default
Repeater List.
Click
You can see
the default
values of the
Repeater List
on the CS-
51PLUS2.
.
cloning software
1
, or copy
2
, and then write to the
When the ICF file is opened on the CS-51PLUS2.
9-47
Double-
click
Select
Advertisement
Chapters
Table of Contents
