Icom ID-51A Advanced Manual page 269

Previous view
16
MENU SCREEN
■ Menu items and Default settings (Continued)
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
In this item, set the Sound options.
Sounds
Volume Select
BC Radio Level
Earphone Mode
Beep Level
Beep/Vol Level Link
Key-Touch Beep
Home CH Beep
Band Edge Beep
Scan Stop Beep
Standby Beep
Sub Band Mute
Scope AF Output
In this item, set the Time options.
Time Set
Date/Time
GPS Time Correct
UTC Offset
Auto Power OFF
In this item, enter the Terminal mode or Access Point mode.
DV Gateway
<<Terminal Mode>>
<<Access Point Mode>>
RANGE OR VALUE (Default is shown in bold)
All, BC Radio Separate or Separate
–5~0~+5
OFF or ON
0~3~9
OFF or ON
OFF or ON
OFF or ON
OFF or ON
OFF or ON
OFF, ON, ON (to me:High Tone) or
ON (to me:Alarm/High Tone)
OFF, Mute, Beep or Mute & Beep
OFF or ON
OFF or Auto
–14:00~±0:00~+14:00
OFF, 30min, 60min, 90min or 120min
16-14
DESCRIPTIONS
Selects to adjust the audio output level of
all bands together, all separately, or just
the BC Radio separately.
Sets the initial audio output level difference
between the BC Radio and the A and B
bands when "All" is set in "Volume Select."
Turns the Earphone mode ON or OFF.
Sets the beep output level.
Selects whether or not the beep output level
can be adjusted by the [VOL] control.
Turns the confirmation beep tones when
key is pushed, ON or OFF.
Turns the Home CH Beep ON or OFF.
Turns the Band edge beep ON or OFF.
Turns the scan stop beep ON or OFF.
Turns the standby beep function in the DV
mode ON or OFF.
Selects to mute the SUB band audio signal
while receiving on the MAIN band, and/or
sound a beep when a signal disappears
on the SUB band.
Selects the audio output option during a
sweep.
Sets the current date and time.
Sets to automatically correct the time us-
ing a GPS signal.
Enters the time difference between UTC
and the local time.
Turns the Auto power OFF function ON or
OFF.
Enters the Terminal mode.
Enters the Access Point mode.