D New Repeater Entry - Icom ID-51A Advanced Manual

Previous view
9
D-STAR OPERATION <ADVANCED>
■ Entering information into Repeater List (Continued)

D New repeater entry

1. Selecting the repeater group
q Push [MENU] .
w Push D-pad( ) to select the root item ("DV Memo-

ry"), and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Repeater List," and then

push D-pad(Ent).
• The repeater groups are displayed.
r Push D-pad( ) to select the desired repeater group,

and then push D-pad(Ent).
• The Repeater List of the selected repeater group is dis-
played.
t Push [QUICK] .
y Push D-pad( ) to select "Add," and then push D-

pad(Ent).
• The REPEATER LIST EDIT screen is displayed.
* When you want to add a new repeater by editing a repeater
memory contents, select "Edit." In this case, after editing, be
sure to select "<<Add Write>>." If you select "<<Overwrite>>,"
the original repeater entered contents are overwritten.
2. Selecting the communication type
u Push D-pad( ) to select "TYPE," and then push D-

pad(Ent) to enter the communication type selection
mode.
D-pad
(Ent)
( )
i Push D-pad( ) to select the communication type.

• DV Repeater: Repeater operation in the DV mode.
• DV Simplex: Simplex operation in the DV mode.
• FM Repeater: Repeater operation in the FM mode.
• FM Simplex: Simplex operation in the FM mode.
o After setting, push D-pad(Ent).
9-25
Select
*
☞ Continued on the next page.