D Using Tx History - Icom ID-51A Advanced Manual
Vhf/uhf transceiver
Hide thumbs
Also See for ID-51A:
- Advanced instructions (369 pages) ,
- Basic instructions (104 pages) ,
- Brochure & specs (5 pages)
Table of Contents
Advertisement
Previous view
8
D-STAR OPERATION <BASIC>
■ Setting "TO" (Destination) (Continued)
D Using TX History
When a call is transmitted in the DV mode, the name
and/or call sign of up to 20 "TO" (Destination) stations
that you called are stored in TX History.
NOTE: If you never transmit a call in the DV mode,
you cannot select "TO" (destination) from TX History.
q Hold down
for 1 second.
• The DR screen appears.
w Push D-pad(
) to select "TO," and then push D-
pad(Ent).
D-pad
(Ent)
( )
e Push D-pad(
) to select "TX History," and then push
D-pad(Ent).
r Push D-pad(
) to select the destination, and then
push D-pad(Ent).
• Example: "Dallas"
• "Dallas" is displayed in "TO."
TIP: You can add the TX HISTORY data to memory,
or delete it from there.
➥ Push [QUICK]
on the TX HISTORY screen,
then push D-pad(
) to select the desired item, and
then push D-pad(Ent).
Example: Select the "Melbourne" repeater in the TX
History.
The Sub name is dis-
played when a repeat-
er is selected.
8-13
"Dallas"
repeater's
call sign is
displayed.
Completed
Advertisement
Chapters
Table of Contents
