Release the front bracket of the front LFF drive cage 2 cable track from the chassis.
d.
Remove the front LFF drive cage 2 cable track assembly.
e.
To replace the component, reverse the removal procedure.
SFF drive cable track assemblies
The Mini-SAS and power cables used in the 48-bay SFF front drive cages are enclosed in two plastic
cable track assemblies. The top cable track connects to the front SFF drive cage 1 backplane; the bottom
cable track connects to the front SFF drive cage 2 backplane.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
Removal and replacement procedures 102