HP apollo 4200 gen9 Maintenance And Service Manual page 56

IMPORTANT: Processor socket 1 must be populated at all times or the server does not
function.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 33).
3.
Remove the access panel
4.
Remove the air baffle
5.
Remove the heatsink ("Heatsink" on page 53).
6.
Open each of the processor locking levers in the order indicated, and then open the processor
7.
retaining bracket.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY
DAMAGED. To avoid damage to the system board, do not touch the processor or the
processor socket contacts.
("Access panel" on page 49).
("Air baffle" on page 50).
Removal and replacement procedures 56