Fbwc Module - HP apollo 4200 gen9 Maintenance And Service Manual

Remove the Smart Storage Battery.
6.
To replace the component, reverse the removal procedure.

FBWC module

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
CAUTION: In systems that use external data storage, be sure that the server is the first unit
to be powered down and the last to be powered back up. Taking this precaution ensures that
the system does not erroneously mark the drives as failed when the server is powered up.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 33).
3.
Remove the access panel
4.
If necessary for easier removal of the FBWC module from the storage controller board, do one of the
5.
following:
Remove the low-profile, standup storage controller board
o
Remove the PCI riser cage (on page 36).
o
CAUTION: When connecting or disconnecting the cache module cable, the connectors on
the cache module and cable are susceptible to damage. Avoid excessive force and use
caution to avoid damage to these connectors.
("Access panel" on page 49).
("Expansion board" on page 59).
Removal and replacement procedures 62