HP apollo 4200 gen9 Maintenance And Service Manual page 64

Remove the server from the rack (on page 33).
3.
Remove the access panel
4.
Remove the air baffle
5.
Open the cable management holder (on page 35).
6.
Disconnect the SATA cables from the M.2 SSD enablement board and the system board.
7.
M.2 SSD SATA cable disconnection when the enablement board is installed in the onboard PCIe
o
expansion slot 1 or 2
M.2 SSD SATA cable disconnection when the enablement board is installed in the PCI riser cage
o
If the M.2 SSD enablement board is installed in the PCI riser cage, remove the riser cage
8.
the PCI riser cage" on page 36).
Remove the M.2 SSD enablement board.
9.
("Access panel" on page 49).
("Air baffle" on page 50).
Removal and replacement procedures 64
("Remove