Remove A Rear Drive Cage - HP apollo 4200 gen9 Maintenance And Service Manual

Disconnect the power cable from the riser board.
6.
Remove the PCI riser cage:
7.
Loosen the captive screw on the front end of the PCI riser cage.
a.
Loosen the thumbscrew on the rear end of the PCI riser cage.
b.
Grasp the PCI riser cage at the touch points and lift it out of the chassis.
c.

Remove a rear drive cage

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
Removal and replacement procedures 37