Remove the power input module.
d.
To replace the component, reverse the removal procedure.
Access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
To remove the component:
Power down the server (on page 26).
1.
Remove the server from the rack (on page 33).
2.
Remove the access panel:
3.
Use a screwdriver to loosen the access panel screws.
a.
Slide the access panel toward the rear of the server, then lift it from the server.
b.
To replace the component, reverse the removal procedure.
Removal and replacement procedures 49